Difference Between Various FloorsWednesday, April 4, 2018
The difference between different kinds of floors:
1.Bamboo plastic floor: This floor is featured by environmental protection, non-absorbent, the same type, pest control, fire prevention and easy installation. The merits are that the cost price is slightly higher. It is mixed with bamboo powder and PVC plastic, after high temperature extrusion, cooling molding. The upper surface pattern is printed using a pad printing method and is made of stone plastic floor with anti-UV.
2.Pure solid wood floor: The performances of this floor are environmental protection, comfortable feet, the demerits are high prices, water deformation, easy insects and afraid of fire. It is used to saw the whole piece of wood into the required long, wide, thick wood chips, and then the upper and lower leveling treatment, four-sided planing slot and the upper surface is made of UV wear-resistant processing into a pure solid wood floor.
3.Strengthen the composite floor: The highlight of this floor is low price, easy installation, the demerits are high formaldehyde content, easy to absorb water deformation. It is mixed with wood powder and glue, and then hot pressed into shape. The bottom surface is made of a waterproof layer. The top surface is made of impregnated wood grain paper mixed with the aluminum oxide to make a wear-resistant layer and pressed on the floor to form a reinforced composite floor.
4.Solid wood composite floor: The merit of this floor is a comfortable foot, the demerit is high formaldehyde content, water deformation, easy insects, afraid of fire, installation cumbersome. It is made of solid wood waste to be sawed into long, wide and thick pieces of wood, hot-pressed on the glue, and then flattened on the upper and lower sides.
5.Wood plastic floor: This wood plastic floor is characterized by environmental protection, non-absorbent, the same type, pest control, fire prevention and easy installation. It is mixed with wood flour and PVC plastic, after high-temperature extrusion, cooling molding. The upper surface pattern was printed using a pad printing method and UV-resistance treatment was used to make the active wood plastic floor.